OK Flux 10.71

ESAB

OK Flux 10.71

The following items have been added to your list


x

OK Flux 10.71 is an agglomerated, basic flux for submerged arc welding. It is used for single and multi-run welding of all plate thicknesses. It can be combined with a wide range of solid wires and cored wires and thus it is suitable for all kinds of steels. OK Flux 10.71 combines good toughness values with excellent weldability. It is used for single and multiwire procedures such as tandem, twin-arc, tandem-twin welding and many more, for butt, overlap and fillet welds. It works equally well on DC and AC current. The good slag detachability and limited alloying of Si and Mn makes it well suited for multi-pass thick section welding. High welding speeds can be achieved producing a finely rippled weld metal, all this in combination with very good impact values. In general construction, OK Flux 10.71 is one of the most used SAW fluxes. Not just for structural steels and fine-grained steels, but also for weather resistant steels e.g. for bridges. Pressure vessels are welded with this flux, because it can be used for a wide range of steels including low temperature steels. This reduces the number of different fluxes a customer needs to have in stock. Wind tower production with plate thicknesses of greater than 50 mm require not only excellent slag detachability, particularly in the first run, and high deposition rates in all following runs, but also excellent toughness values. Since OK Flux 10.71 offers all this it is well established in this market segment. Other applications are in shipbuilding with approvals or in the production of pipes with steels up to X70 strength level. OK Flux 10.71 can also be combined with a number of SAW cored wires in order to increase the productivity and the mechanical properties of the weld metal.


Classifications

Grade S A AB 1 67 AC H5
Name EN ISO 14174

Approvals

Approvals CE EN 13479
PL,RU : NAKS/HAKC RD 03-613-03
Approvals are based on factory location. Please contact ESAB for more information.

Consumable Characteristics

Alloy Transfer Slightly Silicon and moderately Manganese alloying
Basicity Index nom: 1.5
Density nom: 1.2 kg/dm3
Diffusible Hydrogen max 5 ml H/100g weld metal (Redried flux)
Grain Size 0.2-1.6 mm (10x65 mesh) or 0.315 -2.0 mm (9x48 mesh)
Slag Type Aluminate-basic

Flux Consumption

Volts kg Flux / kg Wire DC+ kg Flux / kg Wire AC
26 V 0.7 kg 0.6 kg
30 V 1.0 kg 0.9 kg
34 V 1.3 kg 1.2 kg
38 V 1.6 kg 1.4 kg
Amps Dimensions Travel Speed
580 A Ø 4.0 mm 55 cm/min

Classifications

Wire AWS/EN EN - As Welded AWS - As Welded AWS - PWHT
OK Autrod 12.20 A5.17:EM12/ 14171-A:S2 14171-A: S 38 4 AB S2 A5.17: F7A4-EM12 A5.17: F6P4-EM12
OK Autrod 12.10 A5.17:EL12/ 14171-A:S1 14171-A: S 35 4 AB S1 A5.17: F6A4-EL12 A5.17: F6P5-EL12
OK Autrod 12.22 A5.17:EM12K/ 14171-A:S2Si 14171-A: S 38 4 AB S2Si A5.17: F7A5-EM12K A5.17: F6P5-EM12K
OK Autrod 12.34 A5.23:EA4/ 14171-A:S3Mo; 24598-A:S S MnMo 14171-A: S 50 3 AB S3Mo A5.23: F8A4-EA4-A3 A5.23: F8P2-EA4-A3
OK Autrod 12.32 A5.17:EH12K/ 14171-A:S3Si 14171-A: S 46 4 AB S3Si A5.17: F7A5-EH12K A5.17: F7P5-EH12K
OK Autrod 13.27 A5.23:ENi2/ 14171-A:S2Ni2 14171-A: S 46 5 AB S2Ni2 A5.23: F8A6-ENi2-Ni2 A5.23: F7P6-ENi2-Ni2
OK Autrod 13.24 A5.23:ENi6/ 14171-A:S3Ni1Mo0,2 14171-A: S 50 4 AB S3Ni1Mo0,2 A5.23: F8A5-ENi6-Ni6 A5.23: F8P4-ENi6-Ni6
OK Autrod 12.24 A5.23:EA2/ 14171-A:S2Mo; 24598-A:S S Mo 14171-A: S 46 2 AB S2Mo A5.23: F8A2-EA2-A4 A5.23: F7P0-EA2-A4
OK Autrod 12.30 14171-A:S3 14171-A: S 46 3 AB S3 -
OK Autrod 13.36 A5.23:EG/ 14171-A:S2Ni1Cu 14171-A: S 46 3 AB S2Ni1Cu A5.23: F8A2-EG-G
OK Autrod 13.64 A5.23:EA2TiB/ 14171-A:S2MoTiB A5.23: F8TA6-EA2TiB
OK Autrod 13.62 A5.23:EG/ 14171-A:SZ3TiB -

Approvals

Wire ABS BV CE ClassNK DB DNV GL LR PRS RINA RS VdTÜV
OK Autrod 12.10 * * * - * * * * * - * *
OK Autrod 12.20 * * * - * * * * * * * *
OK Autrod 12.22 * * * * * * * * - - * *
OK Autrod 12.24 * * * * * * * * * * * *
OK Autrod 12.30 - - * - * - - - - - - *
OK Autrod 12.32 - - * - * - - - - - - *
OK Autrod 13.27 - - - - - - - - - - - *
OK Autrod 13.36 - - * - - - - - - - - -
*Selected production units only. Please contact ESAB for more information. Visit esab.com to download specific flux/wire combination fact sheets for more details.

Typical Mechanical Properties

Wire Condition Yield Strength Tensile Strength Charpy V-Notch Elongation
OK Autrod 12.10 As Welded AWS DC+ 360 MPa
(52 ksi)
465 MPa
(67 ksi)
125 J @ 0°C,
(93 ft-lb @ 0 °F)
95 J @ -20°C,
(70 ft-lb @ -20 °F)
75 J @ -30°C,
(56 ft-lb @ -30 °F)
65 J @ -40°C,
(48 ft-lb @ -40 °F)
30 %
OK Autrod 12.20 As Welded AWS DC+ 410 MPa
(59 ksi)
510 MPa
(74 ksi)
135 J @ 20°C,
(100 ft-lb @ 20 °F)
125 J @ 0°C,
(93 ft-lb @ 0 °F)
80 J @ -20°C,
(59 ft-lb @ -20 °F)
55 J @ -40°C,
(41 ft-lb @ -40 °F)
29 %
OK Autrod 12.22 As Welded AWS DC+ 425 MPa
(62 ksi)
520 MPa
(75 ksi)
140 J @ 0°C,
(104 ft-lb @ 0 °F)
100 J @ -20°C,
(74 ft-lb @ -20 °F)
60 J @ -40°C,
(44 ft-lb @ -40 °F)
40 J @ -46°C,
(30 ft-lb @ -46 °F)
29 %
OK Autrod 12.24 As Welded AWS DC+ 500 MPa
(73 ksi)
580 MPa
(84 ksi)
125 J @ 20°C,
(93 ft-lb @ 20 °F)
100 J @ 0°C,
(74 ft-lb @ 0 °F)
60 J @ -18°C,
(44 ft-lb @ -18 °F)
40 J @ -29°C,
(30 ft-lb @ -29 °F)
24 %
OK Autrod 12.30 As Welded EN DC+ 490 MPa 580 MPa
(84 ksi)
130 J @ 20°C,
(96 ft-lb @ 20 °F)
110 J @ 0°C,
(81 ft-lb @ 0 °F)
90 J @ -20°C,
(67 ft-lb @ -20 °F)
60 J @ -30°C,
(44 ft-lb @ -30 °F)
29 %
OK Autrod 12.32 As Welded AWS DC+ 480 MPa
(70 ksi)
580 MPa
(84 ksi)
150 J @ 20°C,
(111 ft-lb @ 20 °F)
130 J @ 0°C,
(96 ft-lb @ 0 °F)
95 J @ -20°C,
(70 ft-lb @ -20 °F)
65 J @ -40°C,
(48 ft-lb @ -40 °F)
40 J @ -46°C,
(30 ft-lb @ -46 °F)
28 %
OK Autrod 12.34 As Welded AWS DC+ 535 MPa
(78 ksi)
620 MPa
(90 ksi)
120 J @ 20°C,
(89 ft-lb @ 20 °F)
105 J @ 0°C,
(78 ft-lb @ 0 °F)
70 J @ -20°C,
(52 ft-lb @ -20 °F)
60 J @ -30°C,
(44 ft-lb @ -30 °F)
45 J @ -40°C,
(33 ft-lb @ -40 °F)
27 %
OK Autrod 13.24 As Welded AWS DC+ 560 MPa
(81 ksi)
630 MPa
(91 ksi)
120 J @ 20°C,
(89 ft-lb @ 20 °F)
85 J @ -20°C,
(63 ft-lb @ -20 °F)
70 J @ -30°C,
(52 ft-lb @ -30 °F)
60 J @ -40°C,
(44 ft-lb @ -40 °F)
40 J @ -46°C,
(30 ft-lb @ -46 °F)
25 %
OK Autrod 13.27 As Welded AWS DC+ 500 MPa
(73 ksi)
600 MPa
(87 ksi)
100 J @ -20°C,
(74 ft-lb @ -20 °F)
60 J @ -40°C,
(44 ft-lb @ -40 °F)
50 J @ -51°C,
(37 ft-lb @ -51 °F)
28 %
OK Autrod 13.36 As Welded AWS DC+ 490 MPa
(71 ksi)
580 MPa
(84 ksi)
120 J @ 20°C,
(89 ft-lb @ 20 °F)
70 J @ -20°C,
(52 ft-lb @ -20 °F)
55 J @ -29°C,
(41 ft-lb @ -29 °F)
27 %
OK Autrod 13.62 As Welded (acc. AWS) Plate thickness 12mm; Heat Input 2.2kJ/mm; Side 1 600A, 32V, 53cm/min; Side 2 700A, 60cm/min. DC+ 510 MPa
(74 ksi)
610 MPa
(88 ksi)
40 J @ -51°C,
(30 ft-lb @ -51 °F)
28 %
OK Autrod 13.64 As Welded (acc. to AWS) Plate thickness 12mm Heat input 2.2kJ/mm 700A, 32V, 60cm/min DC+ 550 MPa
(80 ksi)
650 MPa
(94 ksi)
40 J @ -51°C,
(30 ft-lb @ -51 °F)
28 %

Typical Weld Metal Analysis %

Typical Weld Metal Analysis %
C Cr Cu Mn Mo Ni Si
OK Autrod 12.10 AC , 580A, 29V
0.05 % - - 0.85 % - - 0.2 %
OK Autrod 12.10 DC+ , 580A, 29V
0.04 % - - 1.0 % - - 0.3 %
OK Autrod 12.20 AC, 580A, 29V
0.06 % - - 1.2 % - - 0.2 %
OK Autrod 12.20 DC+, 580A, 29V
0.05 % - - 1.35 % - - 0.3 %
OK Autrod 12.22 AC, 580A, 29V
0.06 % - - 1.2 % - - 0.4 %
OK Autrod 12.22 DC+, 580A, 29V
0.05 % - - 1.4 % - - 0.5 %
OK Autrod 12.24 AC, 580A, 29V
0.06 % - - 1.3 % 0.5 % - 0.25 %
OK Autrod 12.24 DC+, 580A, 29V
0.05 % - - 1.4 % 0.5 % - 0.4 %
OK Autrod 12.30 AC, 580A, 29V
0.10 % - - 1.6 % - - 0.3 %
OK Autrod 12.30 DC+, 580A, 29V
0.09 % - - 1.65 % - - 0.4 %
OK Autrod 12.32 AC, 580A, 29V
0.10 % - - 1.9 % - - 0.35 %
OK Autrod 12.32 DC+, 580A, 29V
0.09 % - - 2.0 % - - 0.5 %
OK Autrod 12.34 AC, 580A, 29V
0.10 % - - 1.5 % 0.5 % - 0.25 %
OK Autrod 12.34 DC+, 580A, 29V
0.09 % - - 1.6 % 0.5 % - 0.4 %
OK Autrod 13.24 AC , 580A, 29V
0.09 % - - 1.50 % 0.2 % 0.9 % 0.45 %
OK Autrod 13.24 DC+, 580A, 29V
0.07 % - - 1.70 % 0.2 % 0.9 % 0.5 %
OK Autrod 13.27 AC, 580A, 29V
0.06 % - - 1.3 % - 2.2 % 0.3 %
OK Autrod 13.27 DC+, 580A, 29V
0.05 % - - 1.4 % - 2.2 % 0.4 %
OK Autrod 13.36 AC , 580A, 29V
0.09 % 0.3 % 0.5 % 1.2 % - 0.7 % 0.4 %
OK Autrod 13.36 DC+, 580A, 29V
0.08 % 0.3 % 0.5 % 1.3 % - 0.7 % 0.5 %
x

Čia sužinosite, kaip rasti OK Flux 10.71

Mes nakantriai laukiame, kol jūs išbandysite mūsų gaminius ir tikime, kad liksite jais patenkinti. Mes orientuojamės į aukščiausią tiek produktų, tiek ir aptarnavimo kokybę, todėl ESAB gaminius parduodame per aukštus aptaranvimo standartus atitinkančius platintojus, kurie gali jums skirti ir dėmesį, ir suteikti pagalbą bei pasiūlyti priimtiniausią sprendimą.

Kad viskas būtų dar paprasčiau, žemiau pateikiame internetinį pirkinių sąrašą. Naršydami mūsų tinklapyje ir spustelėję bet kurį norimą gaminį, galėsite jį nesunkiai įkelti į šį puslapį. Baigę sąrašą galėsite atsisiųsti sau arba atsispausdinti ir nusinešti pas pasirinktą platintoją.

Norėdami rasti ESAB platintoją, pasinaudokite kiekviename mūsų žiniatinklio puslapyje esančia RASKITE PLATINTOJĄ funkcija. Taip pat galite paskambinti mūsų pagalbos linija telefonu ir mes nukreipsime jus teisinga kryptimi.


Užsakymo kodai ir priedai

Part Numbers : OK Flux 10.71
OK Flux 10.71 1000kg(2200lb) 1071H00200
OK Flux 10.71 25kg(55lb) 1071000200
OK Flux 10.71 25kg(55lb) BP 1071800P00
OK Flux 10.71(G) 1000kg 1071H02200
OK Flux 10.71(G) 25kg(55lb) 1071002200
OK Flux 10.71(G) 25kg(55lb) BP 1071802P00
x
x

x

Loading..